Testimonials

Joe Barrat | 5 out of 5 Stars!
"Just wanted to thank you for your prompt and efficient service calibrating my PAT tester. The whole process was effortless. Just what we like! Many thanks".

Cliff Jones | 5 out of 5 Stars!
"We required a pat test calibration on one of our machines, from start to finish we was notified and was updated on our order. The order was dealt with very professionally and would highly recommend PTS Calibrations and Gary for a job well done many thanks 10 stars **********". 
Stephan | 5 out of 5 Stars!
"Quick and professional turnaround.
Need our meter calibration unit calibrated due to NSI visits and engineer site visits. PTS kindly calibrated unit in a timely manner and delivered back to our office."

Adrian Carrotte | 5 out of 5 Stars!
"We have used them twice and i can say that we will continue to use them as long as we can.
Fast turn around and send back. If I could give them 10 out of 10 I would.
Very helpful people"

Contact Form

Calibration Booking

*
*
*
*
*

Martindale

Sort By:  
CP501 Classic Check Plug 240V Socket Tester (CP501)
With over 2 million of these socket testers sold, the Martindale CP501 is the most popular socket tester available. The classic check plug is a quick and easy way to ensure that 13A sockets are correctly wired, indicated by 3 bright long life LEDs.

Wiring faults are indicated by one or more of the LEDs failing to illuminate, with the pattern of lit LEDs indicating the type of fault detected. This fail-safe system means that any LED not lit indicates a fault. The robust ABS housing has a sculpted shape for easy removal and there is a look up chart on the tester for quick fault diagnosis.

The plug induces less than 5mA of earth leakage, well below RCD trip thresholds.

Detects 28 fault conditions
£23.99
SB13 Safebreak R2 Socket Adaptor
SB13 Safebreak R2 Socket Adaptor (SB13)
SB13 Safebreak R2 Socket Adaptor
£29.00
CP201
CP201 250V Industrial Socket Tester (CP201)

The CP201 is an industrial version of the classic check plug, fitted with a 250V 16A plug (BS 4343 / IEC309).

Wiring faults are instantly indicated by one or more of the LEDs failing to illuminate, with the pattern of lit LEDs indicating the type of fault detected. There is a look up chart on the tester for quick fault diagnosis.

£49.99
lokkit1
LOKKIT1 (LOKKIT1)

Electrical safety is paramount when performing 17th Edition and Part P installation testing. Every year people suffer electric shock and burn injuries, some of which are fatal. Implementing the correct safe isolation procedures will ensure the safety of the electrician and avoid these accidents.

The Martindale universal lock out kit is compatible with most circuit breakers. It is supplied with a padlock that has its own unique key, and a safety hasp that enables multiple users to lock off with space for up to 6 padlocks.

The full 16 piece kit includes:

  • 1 x Padlock with unique key
  • 1 x Steel safety hasp, with space for up to 6 padlocks
  • 1 x Green mini MCB lock
  • 1 x Yellow mini MCB lock
  • 1 x Blue medium MCB lock
  • 1 x Large red MCB lock
  • 1 x Small red MCB lock
  • 1 x Red fuse lockout breaker
  • 1 x Yellow fuse lockout breaker
  • 5 x Danger tags which can be overwritten
  • 1 x Black marker for writing on Danger tags
  • 1 x TC55 soft carry case
£89.00
vipd
600V - Voltage Indicator, Proving Device & Lock Out Kit (vipd2)

The complete solution for safe isolation, the Martindale VIPDLOK138 Lock Out Kit contains the VI13800 voltage indicator, PD440 proving device, along with a complete lock out kit, supplied with soft carry cases.

Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before and after use.

The Martindale VIPD138 contains the VI13800 voltage indicator and the PD440 proving device, enabling you to comply with health and safety recommendations for safe working.

The 18 piece VIPDLOK138 kit contains the following items:

  • 1 x PD440 proving device
  • 1 x VI13800 voltage indicator
  • 1 x Padlock with unique key
  • 1 x Steel safety hasp, with space for up to 6 padlocks
  • 1 x Green mini MCB lock
  • 1 x Yellow mini MCB lock
  • 1 x Blue medium MCB lock
  • 1 x Large red MCB lock
  • 1 x Small red MCB lock
  • 1 x Red spring MCB lock
  • 1 x Yellow spring MCB lock
  • 1 x Red fuse lockout breaker
  • 1 x Yellow fuse lockout breaker
  • 5 x Danger tags which can be overwritten
  • 1 x Black marker for writing on Danger tags
  • 1 x TC55 soft carry case
£219.00
vipd
1000V- Voltage Indicator, Proving Device & Lock Out Kit (vipdkit)

The complete solution for safe isolation, the Martindale VIPDLOK150 Lock Out Kit contains the VI-15000 voltage indicator, PD690 proving device, along with a complete lock out kit, supplied with soft carry cases.

Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before and after use.

The Martindale VIPD150 contains the VI-15000 voltage indicator and the PD690 proving device, enabling you to comply with health and safety recommendations for safe working.

The 16 piece kit contains the following items:

  • 1 x PD690 proving device
  • 1 x VI-15000 voltage indicator
  • 1 x Padlock with unique key
  • 1 x Steel safety hasp, with space for up to 6 padlocks
  • 1 x Green mini MCB lock
  • 1 x Yellow mini MCB lock
  • 1 x Blue medium MCB lock
  • 1 x Large red MCB lock
  • 1 x Yellow fuse lockout breaker
  • 1 x Red fuse lockout breaker
  • 5 x Danger tags which can be overwritten
  • 1 x Black marker for writing on Danger tags
  • 1 x TC55 soft carry case
£249.00
Martindale HPAT 500
Martindale HPAT 500 (HPAT500)

The HPAT500 is an easy to use battery powered, hand held PAT tester with simple one-button test selection. It’s lightweight portable design make it ideal for testing in all locations whether under a desk or testing a wall mounted monitor. The tester comes with rechargeable batteries and mains charger for low cost of ownership and can even be used whilst recharging ensuring no downtime.

Simple one button testing
Pass/Fail indicator with test results
Class I, Class II & Lead Test
200mA Earth Bond - IT Safe
500V Insulation Test
Rechargeable batteries

Earth Bond Test (IT Safe)

  • Test Current: 200mA DC
  • Test Voltage: 4V DC
  • Default Pass Value: 0.1Ω
  • Secondary Pass Value: 0.2Ω

Insulation Resistance

  • Test Voltage: >500V DC at 1mA
  • Display Range: 0.20Megohm - 19.99Megohm
  • Pass Value: 1Megohm Class I, 2Megohm Class II

IEC & Extension Lead Test

  • Earth Continuity: 200mA DC
  • Insulation Test: 500V DC
  • Wiring Test: Live, Neutral Continuity& Polarity

Fuse Test

  • Test Voltage: 4V DC
  • Test Current: 200mA DC
  • Pass Level: >2mA

£329.00
Martindale HPAT 500
Martindale HPAT 600 (HPAT600)

The HPAT600 is an easy to use battery powered, hand held PAT tester that is ideal for testing all types of portable appliances. The tester is supplied with rechargeable batteries for low running costs and a mains and in-car charger for convenience. Whilst recharging, the HPAT can still be operated from the mains supply ensuring maximum productivity at all times.
It has a fast automatic one button test sequence or a simple to operate manual mode useful for diagnostics and can be used for testing both 240V and 110V appliances with the optional TL157 adaptor lead

PAT Tester with User Adjustable Pass Limits and Memory
Simple one button testing
Pass/Fail indicator with test results
Class I, Class II & Lead Test
200mA Earth Bond - IT Safe
500V Insulation Test
Rechargeable batteries

Earth Bond Test (IT Safe)

  • Test Current: 200mA DC
  • Test Voltage: 4V DC
  • Range: 0 - 19.99Ω
  • Resolution: 0.01Ω
  • Default Pass Value: 0.1Ω
  • User Selectable Pass Value: 0.1Ω to 0.9Ω in 0.1Ω steps

Insulation Resistance

  • Test Voltage: 
    500V: >500V DC at 1mA 
    250V: >250V DC at 1mA
  • Default Pass Value: Class I - 1MΩ, Class II - 2MΩ
  • User Selectable Pass Value: 0.3MΩ to 1MΩ in 0.1Ω steps, or 1MΩ to 10MΩ in 1MΩ steps

IEC & Extension Lead Test

  • Earth Continuity: 200mA DC
  • Insulation Test: 500V DC
  • Wiring Test: Live, Neutral Continuity& Polarity
  • Earth Bond Default Pass Value: 0.1Ω
  • Earth Bond User Selectable Pass Value: 0.1Ω to 0.9Ω in 0.1Ω steps
  • Insulation Resistance Default Pass Value: 1MΩ
  • Insulation Resistance User Selectable Pass Value: 0.3MΩ to 1MΩ in 0.1Ω steps, or 1MΩ to 10MΩ in 1MΩ steps

Fuse Test

  • Test Voltage: 4V DC
  • Test Current: 200mA DC
  • Pass Level: >2mA

 

£349.00
Martindale EPAT 1600
Martindale Easypat 1600 (MPAT1600)
The EPAT1600 is a simple one button, one test manual PAT tester which will test all 240V & 110V portable appliances. There are three earth bond test currents which can be selected on a simple rocker switch, including a 200mA soft test for computers and sensitive I.T. equipment.
The Easypat has a built in lead tester for testing extension leads, IEC leads and adaptors. It will also perform a polarity test and is supplied with the EX332 240V lead test adaptor.

• Tests both 240V and 110V appliances
• Class I, Class II & power lead tests
• Simple one button, one test operation
• Earth bond test currents – 25A, 8A and 200mA for sensitive IT equipment.
• Built in lead tester
£658.80
MARTINDALE EPAT 2100
Martindale EPAT2100 (EPAT2100)
The simple one button, one test interface for testing both 240V and 110V appliances speeds up testing. It performs the mandatory tests for earth bond and insulation and has the added benefits of run current, run leakage and flash test.
It can be powered by a 110V or 240V supply which enables the run current or run leakage test to be performed without the need for connection to an external power source. The TL150 110V adaptor is included to enable connection to a 110V supply.

The Easypat2100 has a built in lead tester for testing extension leads, IEC leads and adaptors. The lead tester will perform a polarity test and is supplied with the EX332 240V lead test adaptor.

• Suitable for onsite PAT testing and workshop applications
• Simple one button, one test operation
• Tests both 240V and 110V appliances
• Class I, Class II & power lead tests
• Performs 5 PAT tests (earth bond, insulation, run current, run leakage, flash)
• Earth bond test currents – 25A, 8A and 200mA for sensitive IT equipment.
• Built in lead tester
£922.80
et400 mft
Martindale ET4000 MFT (ET4000 MFT)

The new ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with the very latest amendment 3 to the BS7671 17th Edition Wiring Regulations which is effective from January 2015.
The testers simplify 17th edition testing by having the latest amendment 3 fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the new ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time. On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating . Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels are really within the new Cmin limits defined in amendment 3.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach

£935.00
et4500 mft
Martindale ET4500 MFT (ET4500 MFT)

The new ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with the very latest amendment 3 to the BS7671 17th Edition Wiring Regulations which is effective from January 2015.
The testers simplify 17th edition testing by having the latest amendment 3 fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the new ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time.

On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating. Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels are really within the new Cmin limits defined in amendment 3.

In addition the ET4500 can be used to carry out 3 wire earth testing and has on board memory to store and download all installation test results for documentation. It is also supplied with low loss AA rechargeable batteries which can be easily recharged in the tester with the mains adaptor or optional in-car charger.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach.

£1,125.00
Per Page      1 - 12 of 12
  • 1