Testimonials

Joe Barrat | 5 out of 5 Stars!
"Just wanted to thank you for your prompt and efficient service calibrating my PAT tester. The whole process was effortless. Just what we like! Many thanks".

Cliff Jones | 5 out of 5 Stars!
"We required a pat test calibration on one of our machines, from start to finish we was notified and was updated on our order. The order was dealt with very professionally and would highly recommend PTS Calibrations and Gary for a job well done many thanks 10 stars **********". 
Stephan | 5 out of 5 Stars!
"Quick and professional turnaround.
Need our meter calibration unit calibrated due to NSI visits and engineer site visits. PTS kindly calibrated unit in a timely manner and delivered back to our office."

Adrian Carrotte | 5 out of 5 Stars!
"We have used them twice and i can say that we will continue to use them as long as we can.
Fast turn around and send back. If I could give them 10 out of 10 I would.
Very helpful people"

Contact Form

Calibration Booking

*
*
*
*
*

Electricians Test Instruments

Sort By:  
Fluke 1650
Fluke 1653B Multifunction Installation Tester (1653B)

Safer, easier installation testing.
The 1653B Installation Tester verifies the safety of electrical installations in domestic, commercial and industrial applications. It can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and all relevant local standards.

Faster
Two measurements at once and a dual display. PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers.
Additional new high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCD's.
Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation.
Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections.

Safer
Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations.
Supplied with the SureGrip™ test leads and clips which gives the user a comfortable, reliable grip

Easy
Rotary dial knob indicates clearly which function is selected, all functionalities on one spot and no complex multi level menus.
Large display with backlight, clear symbols and exceptionally wide viewing angle for easy and safe readings.
PASS/FAIL indication for RCD test results.
Variable RCD current mode for customized settings.
Extended Memory
Extended documentation mode (UK only)
Rugged & lightweight Withstands a drop of 1 meter.
Compact, lightweight (less than 1.3 kg) and padded neck-strap to free your hands for all day testing.

£799.00
et400 mft
Martindale ET4000 MFT (ET4000 MFT)

The new ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with the very latest amendment 3 to the BS7671 17th Edition Wiring Regulations which is effective from January 2015.
The testers simplify 17th edition testing by having the latest amendment 3 fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the new ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time. On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating . Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels are really within the new Cmin limits defined in amendment 3.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach

£935.00
Megger MFT1731 (MFT1731)

The most sophisticated of the 17th Edition testers brings Type B RCD testing, 3-pole earth electrode testing to a downloading and rechargeable instrument.   

Additional benefits are that is supplied in a large soft, carry case with sufficient space for the tester, test leads and some tools. The MFT1731 has enabled additional earth electrode testing options such as 3-pole ART electrode testing and stakeless electrode testing. The clamps are optional accessories.

  • Two and three wire non trip loop testing for fast repeatable results
  • Large bright LCD display showing dual parameters - loop resistance and fault current, insulation resistance and test voltage
  • Phase rotation indication for verification of rotating machinery
  • 3-phase RCD testing for industrial applications with no earth
  • Suite of earths test for electrode resistance measurement
  • On-board data storage and Bluetooth® download

This latest series of multifunction installation tester adds one to the nomenclture and vastly to the value of these testers. The range of 3 instruments are expressly for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.

£999.00
et4500 mft
Martindale ET4500 MFT (ET4500 MFT)

The new ET4000 and ET4500 testers carry out all the tests needed to verify the safety of electrical installations in domestic, commercial and industrial wiring installations in accordance with the very latest amendment 3 to the BS7671 17th Edition Wiring Regulations which is effective from January 2015.
The testers simplify 17th edition testing by having the latest amendment 3 fuse tables for Zs values built-in together with red and green LED indicators for instant pass/fail results.

Everything about the new ET Series has been designed to save time and make testing easier, from the capability to display all results from an RCD autotest on one screen to the inclusion of useful Help menus at the press of a button. Even the soft carry case has been designed to enable testing without having to unpack and repack the instrument every time.

On connection the testers carry out an automatic polarity and wiring check identifying potentially dangerous wiring faults in advance of any testing.

Fast, reliable high current and non-trip loop testing comes as standard together with a high level of input protection and a CAT IV safety rating. Both models include phase sequence indication and TRMS voltage measurement to cover every job and ensure voltage levels are really within the new Cmin limits defined in amendment 3.

In addition the ET4500 can be used to carry out 3 wire earth testing and has on board memory to store and download all installation test results for documentation. It is also supplied with low loss AA rechargeable batteries which can be easily recharged in the tester with the mains adaptor or optional in-car charger.

Both models are supplied with a full range of accessories including Martindale test leads with clips and prods all terminated with industry standard 4mm plugs. The slimline Martindale remote start probe with test button is included as standard allowing one handed measurement in those areas that are hard to reach.

£1,125.00
Per Page      1 - 4 of 4
  • 1